Description Of Keyboard Operation - Savch S3100E Series User Manual

Table of Contents

3.2 Description of Keyboard Operation

3.2.1 Parameter setting

Here are three levels of menu:

1.Function code number group (first)

2.Function code labeling (second)

3.Function code value setting(third)

Note:Press PRG / ESC or DATA / ENT to back to second-level menu when in the third-level. The difference

between them is:DATA / ENT key stores the set parameter into control board before backing to

second-level menu and shifts to the next function code automatically. While PRG / ESC key backs to the

second-level menu directly without storing parameters and keeps the current function code.

For example, set the frequency of function code 07-01 from 00.00Hz to 01.05Hz.

In the state of third-level menu, the function code can't be modified if the indicator does not flicker, the reason

of would be:

1)The parameter s of function code can not be modified, e.g. actual detection parameters, operation record

parameters, etc.

2)The parameter s of function code can not be modified in running state, the code could be modified only

when the motor stops.

Table of Contents