Bosch CLC6101i-W 50 HE Service Manual page 63

Climate Class 6100i / 6000i / 8100i / 8000i
Disassemble the screw fixing control box ass'y.
9)
10) Pull down the terminals connecting the electric box substrate.
Take out the thermistor lead wire from guide groove.
11)
Cut the wire fixing band fixing the transfer connector of
the compressor and control box ass'y, then disassemble
the terminal of reactor and compressor, after all, disasse-
mble control box ass'y.
(Disassemble the control box ass'y)
. (1 screw) 12）
13） Disassemble Bulkhead ass'y.(2 screws)
14） Remove remain cover and compressor cover.(4 pcs )
6-12
Remove compressor cover.(1 pcs)
(Method of remove compressor cover)
(Method of assemble cover)