Table of Contents
Advertisement
2 Safety instructions
The installation and commissioning as well as the connection of electrical components require
technical knowledge commensurate with a recognised vocational qualification as a fitter for
plumbing, heating and air conditioning technology, or a profession requiring a comparable
level of knowledge [specialist].
The following must be observed during installation and commissioning:
relevant local and national regulations
•
accident prevention regulations of the professional association
•
instructions and safety instructions of this manual
•
WARNING
Danger of scalding due to the escape of hot fluids!
With pressure relief valves, there is a risk of scalding due to the escape of vapour
or hot fluid.
Please ensure for each pressure relief valve that no personal injury or material
damage may occur due to possibly escaping medium.
Install a discharge line.
Observe the instructions regarding the pressure relief valve.
The pressures calculated by the installation planner for the expansion tank
CAUTION
Risk of burns!
The valves, fittings and the pump may heat up to more than 100 °C
during operation.
The insulating shell must remain closed during operation.
6
and the operating pressure of the installation must be set.
997xx3xx-mub-en – V01
2 Safety instructions
2020/08
Advertisement
Table of Contents
