Table of Contents
Advertisement
2 Safety instructions
The installation and commissioning as well as the connection of electrical components require
technical knowledge commensurate with a recognised vocational qualification as a fitter for
plumbing, heating and air conditioning technology, or a profession requiring a comparable level of
knowledge [specialist].
The following must be observed during installation and commissioning:
relevant local and national regulations
●
accident prevention regulations of the professional association
●
instructions and safety instructions mentioned in these instructions
●
Personal injury and damage to property!
The product must only be used in heating circuits filled with heating water according
to VDI 2035 / Ö-Norm H 5195-1.
►
Material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant properties
are lost. We do not assume liability nor provide warranty for damage to property resulting from
sealants damaged in this way.
It is imperative to prevent the EPDM sealing elements from making contact with substances
►
containing mineral oils.
Use a silicone- or polyalkylene-based lubricant free of mineral oil such as Unisilikon L250L
►
and Syntheso Glep 1 from Klüber or a silicone spray.
4
The product must not be used in drinking water applications.
WARNING
993x063x-mub-en - V04
CAUTION
2
Safety instructions
02/2023
Advertisement
Table of Contents
