Table of Contents
Advertisement
3 Assembly and installation [specialist]
NOTICE
Material damage due to high temperatures!
As the solar fluid can be very hot near the collector, the group of fittings must be installed at a
sufficient distance from the collector field. It may be necessary to install an intermediate tank to
protect the expansion tank.
Not included in
the scope of delivery!
Example: SolarBloC midi Premium
8
Accessories: cutting-ring compression fitting
1. Push the union nut ② and the cutting ring ③ onto the
copper pipe ①. The pipe must protrude at least 3 mm
from the cutting ring in order to ensure the force
transmission and the sealing.
2. Insert the support sleeve ④ into the copper pipe.
3. Insert the copper pipe with the plugged-on individual
parts (②, ③ and ④) as far as possible into the
housing of the cutting-ring compression fitting ⑤.
4. First, screw the union nut ② manually.
5. Tighten the union nut ② by rotating one full turn.
Secure the housing of the compression fitting ⑤
against distort, in order to avoid damaging the
sealing ring.
1. Remove the station from the packaging.
2. Remove the insulating front shell.
997xx3xx-mub-en – V01
3 Assembly and installation [specialist]
2020/08
Advertisement
Table of Contents
