Table of Contents
Advertisement
1 General Information
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
1.1
About these instructions
These instructions describe the installation, commissioning, function and operation of the
solar stations SolarBloC midi (DN 20) and SolarBloC maxi (DN 25) with Premium equipment.
The chapters called [specialist] are intended for specialists only.
For other components of the solar installation, such as pumps, collectors, storage tanks,
expansion tanks and controllers, please observe the instructions of the corresponding
manufacturer.
1.2
About this product
The station is a premounted group of fittings checked for tightness and used to circulate the
solar fluid in the solar circuit. It contains a preset controller as well as important fittings for
the operation of the system:
Ball valves in the flow and return line with exchangeable spindle
•
Check valves in the flow and return ball valves
•
Thermometers in the flow and return
•
FlowRotor (measuring device with Hall sensor)
•
Temperature sensors in the flow and return
•
Pressure gauge to display the system pressure in the solar circuit
•
Airstop to easily vent the solar circuit
•
Flush and fill valves with caps
•
Solar pressure relief valve
•
High-efficiency pump
•
4
997xx3xx-mub-en – V01
1 General Information
2020/08
Advertisement
Table of Contents
