Table of Contents
Advertisement
1
General Information
1 General Information
Carefully read these instructions before installation and commissioning. Save these
instructions in the vicinity of the installation for future reference.
1.1 Scope of these instructions
These instructions describe the installation, commissioning, functioning and the operation of a mixed
HeatBloC®.
For other components of the installation, such as the pump, the controller or the modular distribution
manifold, please observe the instructions of the corresponding manufacturer. The chapters called
[specialist] are intended for specialists only.
1.2 Designated use
The product may only be used in heating circuits taking into consideration the technical limit values
indicated in these instructions.
It must not be used in drinking water applications.
Improper usage excludes any liability claims.
This product complies with the relevant directives and is therefore labelled with the CE mark. The
Declaration of Conformity is available upon request, please contact the manufacturer.
Only use PAW accessories with the product.
02/2023
993x063x-mub-en - V04
3
Advertisement
Table of Contents
