Microchip Technology AVR-IoT WA User Manual page 24

Figure 3-11. MQTT MCC
3.1.1.4 Generating MCC Files and Programming the Board
• After the addition and/or configuration of component libraries and peripherals, click the Generate button on the
left-hand corner of the window, as shown in the
• Click the Make and Program Device button near the middle of the toolbar. Make sure the board is connected to
the system during programming.
©
2020 Microchip Technology Inc.
AVR-IoT WA User Guide
Generating MCC Code, and wait for the generation to complete.
User Guide
Code Source Platforms
DS50002998A-page 24