4-Display Card - Interlogix ATS125 Series Programming Manual

4-Display card

Display card detail of the last card badged.
Display Card
Menu:
This menu is available to verify if the card settings are correct (the card read has
the correct card numbers). After a card is badged, all details concerning the
System code and the Card number are displayed. If the system code is unknown,
this menu may be used to reveal the card's system code.
Caution: Part of the programming must to be completed before the correct
information will be displayed. The readers must be working, available, and
configured for the correct card formats.
When checking the System code for a set of cards, always check several cards
to ensure that the System code is the same for all cards in the set. This also
helps to indicate that the correct "Card Format" has been selected in the reader
options.
If different cards in the same set of cards show different System codes, re-check
the card format selected.
Examples of display
Before badging a card:
Waiting For Card to be Badged (0)
ENTER - Exit:
When a card has been badged:
USER 256:SC722,ID256[240.0.0.3.4.1.0]
ENTER - Exit:
In this example, the system code is 722 and the Card ID is 256.The 7 number
code between brackets is a special code for cards that can be used in Titan, card
issues.
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide 41