Figure 2: 621T DVI Optical Transmitter – Top and Lower Side Panels Figure 3: 621T DVI Optical Receiver Figure 4: 621R DVI Optical Receiver – Top and Lower Side Panels Figure 5: 621T and 621R DVI Optical Transmitter and Receiver System...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 When setting up a transmitter / receiver system you can connect the 12V power supplies to the transmitter and to the receiver simultaneously.
Overview The high performance Kramer 621T and 621R have a transmission range of more than 300 ft. (more than 100 meters) of single link high-resolution digital graphic data over fiber optic cables, and EDID (UTP) cabling. In particular, the 621T/621R pair:...
Your DVI Optical Transmitter/ Receiver 3.1 Power Connect Feature The Power Connect feature lets you power a transmitter / receiver system by connecting just one power adapter to either the transmitter or the receiver. The other unit is fed over the same CAT5 cable.
Your DVI Optical Transmitter/ Receiver 4.1 Your 621T DVI Optical Transmitter Figure 1, Figure 2 and Table 1 define the 621T DVI Optical Transmitter: Top Side Panel Lower Side Panel Figure 1: 621T DVI Optical Transmitter Top Side Panel Lower Side Panel...
DDC CAT5 Connector 4.2 Your 621R DVI Optical Receiver Figure 3, Figure 4 and Table 2 define the 621R DVI Optical Receiver: Figure 3: 621T DVI Optical Receiver 1 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 7)
Your DVI Optical Transmitter/ Receiver Figure 4: 621R DVI Optical Receiver – Top and Lower Side Panels Table 2: 621R DVI Optical Receiver Features Feature DVI OUT Connector 12V DC POWER LED LINK LED R CL Optic Cables DDC CAT5 Connector...
Class 1, classified by CDRH/FDA for eye safety 1 Switch OFF the power on each device before connecting it to your 621T and 621R. After connecting your 621T and 621R, switch on its power and then switch on the power on each device...
Connect the 12V 2.1A DC power adapter to the power socket of either the 621T or the 621R and connect the adapter to the mains electricity (not shown). Turn the power on the source and the display to ON. Host...
Make sure that your graphic card supports the maximum resolution of the display you are about to connect Avoid “hot plugging” the 621T or 621R. This is not a recommended practice with live digital voltages 5.3 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors...
12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08", W, D, H) WEIGHT: 0.3 kg. (0.67 lbs.) approx. ACCESSORIES: Power supply, bracket installation kit, 1 DVI/DVI male to male cable 1 Specifications are subject to change without notice Technical Specifications of the 621T/621R 621R DVI OUT 12V DC 1.25A...
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the 621R and is the answer not in the manual?
Questions and answers