Specifying a searched subnet
In the following cases, the location in which printers are searched for should
be specified.
• If the printer is in a location that requires many routers (more than 10
hops) to be transversed
• When you wish to use a printer that is far from the local subnet
• When a larger maximum number of hops results in the list containing
many printers
• If too many broadcast packets will be sent into the network, resulting
in increased network traffic
Click the [Advanced] button in the Minolta PageScope NDPS Gateway
1.
dialog.
The Advanced dialog appears.
Click the "IP Discovery" tab of the Advanced dialog.
2.
A list of subnet addresses is displayed.
The Subnet list allows users to specify a particular subnet to be
included in the search in addition to controlling the detection with a
maximum hop count.
3 Printer Agent Configuration
15