Manually Adding A Printer - Konica Minolta PageScope User Manual

3.3 Manually Adding a Printer

Click the [Add Device] button to add other printers that cannot be or have
not been automatically detected by the configuration utility. This is useful
when you have defined a small network coverage for printer detection (e.g.,
hop count = 0), but you want to configure a distant printer.
Click the [Add Device] button in the Minolta PageScope NDPS Gate-
1.
way dialog.
The Add Device dialog appears.
Enter the IP address, and then click the [OK] button.
2.
A supported Minolta printer is added.
Whether the printer for that IP address exists or not is checked. If that printer
exists on the network and if it can be confirmed that the printer is a
supported Minolta printer, that printer is added to the list of detected printers
in the Minolta PageScope NDPS Gateway dialog.
3 Printer Agent Configuration
13