Installation; Installing Ndps - Konica Minolta PageScope User Manual

2 Installation

This section describes how to install Minolta PageScope NDPS Gateway,
which is composed of different parts. The gateway component provides
NDPS service to NDPS clients for non-NDPS printers. The control snap-in
utility manages the Minolta printer agents. Additionally, the configuration
utility allows you to configure the NDPS printer agents.

2.1 Installing NDPS

The Minolta PageScope NDPS Gateway is added to the Novell NDPS.
Therefore, the first step is to install NDPS.
1. When installing NetWare 5.x or 6.x, make sure that NDPS is also
installed. If the server is installed without NDPS, you can add the ser-
vice after server installation by loading "NWCONFIG.NLM", then
selecting "Product Options", and adding NDPS to the server.
2. The administration utility is "NWADMN32.EXE", located at
"SYS:\PUBLIC\WIN32".
3. Run "NWADMN32", and then select an NDPS broker. Create NDPS
brokers when necessary.
4. Add printer drivers, banners and fonts to NDPS via the NDPS Resource
Service Manager.
5. The NDPS Printer Manager for Windows 95, 98, NT and 2000 client is
"NWPMW32.EXE", located at "SYS:\PUBLIC\WIN32".
2 Installation
3