Configuring A Printer Agent - Konica Minolta PageScope User Manual

3.2 Configuring a Printer Agent

When creating either a public access printer or a controlled access printer,
the same Create Printer Agent dialog appears. After completing the dialog,
the Minolta PageScope NDPS Gateway dialog appears.
A list of printer names and their corresponding IP address is displayed in the
Minolta PageScope NDPS Gateway dialog.
Note
• To detect printers located in other subnets, click the [Advanced]
button. Refer to section 3.4 for details.
• To add a single printer located in another subnet, click the [Add
Device] button, and then following the instructions explained in
section 3.3.
3 Printer Agent Configuration
11