Image Size; Reset Button - Minolta Dimage Scan Multi Instruction Manual

OUTPUT SIZE
The Output Size boxes list the dimensions of the final scan (the size your image will be if printed at 100%). Usually,
the output size is set by default according to the input resolution, output resolution, and cropping frame area. To
specify an output size:
1. Select the unit and the output resolution.
• The output resolution cannot be selected when pixel is the selected unit.
2. Enter the width and height directly into the list box.
3. Lock the output size by clicking on the lock button.
• The input size and resolution will change accordingly.
• The cropping frame can be proportionally resized.
MAGNIFICATION
Magnification is equal to the input resolution divided by the output resolution (or the output size divided by the input
size).
Magnification is determined by the input and output settings.
The magnification can be set directly, the input and output values will change accordingly.
• When the selected unit is pixels (Unit drop-down list), the magnification cannot be selected.
• If the input size and output size are not locked, the output size and input resolution will change according to the
set magnification.
• If the output size is locked, the input size and input resolution will change according to the set magnification.
• If the input size is locked, output size and input resolution will change according to the set magnification.

IMAGE SIZE

The image size is listed in megabytes (MB), kilobytes (KB) or bytes (B). Actual file size may differ among file types.

RESET BUTTON

Cancels the changes made to the scan settings of the selected Job.
52