Quick Guide To Scan Settings - Minolta Dimage Scan Multi Instruction Manual

QUICK GUIDE TO SCAN SETTINGS

This Quick Guide only describes one method of determining the settings. Please read the entire Scan Settings
section in the manual for details.
1. Select Default as the Job category
(p. 44).
2. Enter the desired OUTPUT RESOLUTION.
• Example: You want to print the image at 300dpi on
your printer.
• When the selected unit is pixels (from the Unit drop-
down list) the output resolution cannot be selected.
3. Select the UNIT of measurement.
• Example: You want the size to be listed in inches..
4. Enter the desired OUTPUT SIZE.
• Example: You want the image to be printed as 4.5
x 3 inches (width x height).
• The cropping frame on the prescan will change to
meet this ratio.
5. Lock the OUTPUT SIZE by clicking on
the lock button next to it.
6. Adjust the cropping frame if needed.
The INPUT SIZE will automatically
change.
• With the Output size locked, the frame ratio will
not change, but the size can change.
• If you do not like the ratio and the output size
doesn't have to be exact – unlock the output size,
then make minor adjustments to the cropping
frame.
7. The Scan Settings are ready for you to
do the final scan of the image.
• Using this Quick Guide, the INPUT RESOLUTION
is determined by the other settings.
50