Minolta Dimage Scan Multi Pro Hardware Manual page 17

Windows 98, 98SE, 2000 professional, XP, and Macintosh
Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is not blinking. Turn the
scanner off and then disconnect the cable.
Windows Me
To disconnect the scanner, quit the DiMAGE Scan Utility. Left click on the unplug-or-
eject-hardware icon located on the task bar. A small window will open indicating the
device to be stopped.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will appear. Click OK. Turn the
scanner off and then disconnect the
cable.
When more than one external device are connected to
the computer, repeat the procedure above except right
click on the unplug-or-eject-hardware icon. This will open
the unplug-or-eject-hardware window after clicking on the
small window indicating the unplug operation.
On the unplug-or-eject-hardware window, the hardware
devices to be stopped will be displayed. Highlight the
device by clicking on it then click the stop button.
A confirmation screen will open to indi-
cate the device to be stopped. Click the
OK button to stop the device.
A third and final screen will appear to
indicate the scanner can be safely dis-
connected from the computer; click OK.
Turn the scanner off and then disconnect
the cable.
17