Table of Contents
Advertisement
SEQUENCES AND TRANSPORTS
Finger drumming can be fun, but the razzmatazz also has a built-in step sequencer
so you can record and playback sequences.
START AND STOP A SEQUENCE
1.
Push the Home button once or twice until you
see the Sequence Home Screen.
2.
Touch one of the 16 sequences in the grid to
select it.
3.
Touch the clock in the upper right corner of the
screen to open the Transports popup, then
touch Play to hear the selected sequence.
4.
Push the Left Arrow button to go back to the
Sequence Home screen.
5.
Tap a different sequence in the grid, and that
sequence will start when the current sequence
finishes.
6.
Push the Right Arrow button to go to the Super
Stepper screen and watch the cursor advance
through the steps. The Super Stepper is a type
of Step editor that allows you to see the steps
for all of the pads at once, while also allowing
you to focus on one pad at a time.
7.
Touch the clock again to open the Transports
popup, and then touch Stop to end playback.
Sequence
thumbnails show you
which pads are used
in the sequence.
P. 24 of 89
nanobox | razzmatazz User Manual
Sequence Home
Transports Pop-Up
Super Stepper
Oct 14, 2022
Advertisement
Table of Contents
