Table of Contents
Advertisement
Macro Controls for Clip and Slicer Pads
The following Macro controls are specific to Clip or Slicer Pads.
Knob
QUANT
SYNC
SLICE
SLSEQ
P. 22 of 89
Description
Playback of a Clip pad will start and end on the next
quantization boundary selected here. For example, if the Quant
is set to 1 bar, the playback will begin at the start of the next
bar.
Applies to Clips only.
Sync is only enabled when the Quant Size is not None. The
Sync feature prevents timing drift that can occur when the
length and BPM of a clip does not align exactly with the tempo
of playback. When Sync is used, nanobox | razzmatazz will
realign the audio to match the clock at the step size specified
here.
Select a value for Sync that will control the size of the musical
unit to which the clip will be synchronized. Choose small
settings, like 1/16th, for rhythmic or percussion clips. Choose
large settings, like 1-bar, for sustained tones or drones.
Applies to Clips only.
Specify which slice will be played. Use SLSEQ knob to add
some variety.
Applies to Slicers only.
When Slice Sequencer is set to a value other than None, each
new note will advance the selection of the next slice to play.
None: Always play the same slice.
Forward: Play the next slice each time the pad is triggered.
Backwards: Play the previous slice each time the pad is
triggered.
Random: Randomly select a slice to play
Stagger: Slice selection will change in a somewhat random
way. It will move forward a few slices, then back a couple of
slices, and repeat.
Applies to Slicers only.
nanobox | razzmatazz User Manual
Oct 14, 2022
Advertisement
Table of Contents
