Problems With Print Quality - MINOLTA-QMS PagePro 4100GN User Manual

12
12.2

Problems with print quality

If you are having problems with print quality, follow these steps:
G
Remove the imaging cartridge and shake it back and forth carefully to
distribute the remaining toner evenly.
G Remove the imaging cartridge and check it for damage. If necessary,
replace it with a new cartridge, see page 11-5.
G Clean the inside of the printer, see page 11-2.
G
Deactivate the Toner Save feature in the print menu and try another
sample print-out, see page 4-17.
Problem
Blank pages
Black pages
Print-out is too light
12-12
Possible cause
The imaging cartridge is empty
or damaged.
The imaging cartridge is
damaged.
The Toner Save mode has been
activated.
Insufficent toner in the cartridge.
The imaging cartridge is
damaged.
Troubleshooting
Action
Remove the imaging cartridge
and check it. If necessary,
replace it with a new cartridge,
see page 11-5.
Remove the imaging cartridge
and check it for damage. If
necessary, replace it with a new
cartridge, see page 11-5.
Check the setting in the printer
driver and in the printer menu.
Change the setting and try it
again.
Lift out the imaging cartridge and
shake it in order to improve the
distribution of the remaining
toner. If the problem persists, fit
a new cartridge, see page 11-5.
Remove the imaging cartridge
and check it for damage. If
necessary, replace it with a new
cartridge, see page 11-5.
PagePro 4100GN