Table of Contents
Advertisement
2
If you installed an optional face-
up tray and you want the sheets
to come out face up, then open
the face-up tray instead of the
face-down tray, and set the
face-up/face-down selection
switch as shown.
Loading paper in the manual feed tray
1
Make sure that the tray cover is properly attached to Tray 1.
2
Open the paper guides.
3
Insert a sheet of paper as far as
possible into the manual feed tray
with the side to be printed facing up,
and then adjust the paper guides so
that both sides of the paper are se-
cure.
?
How many sheets may I place in
the tray?
Load only one sheet of paper at
a time.
2-8
Setting up the printer
Advertisement
Table of Contents
