6.6.7 Adjustment of the combustion chamber door
In order for the stove to burn at its best efficiency, the door must provide a perfect seal with the
firebox. Therefore, the gasket should be inspected periodically to check for a good seal. The
gasket seal may be improved with a simple latch mechanism adjustment:
1.
Remove the split pin by pulling and turning it using pliers.
2.
Turn the handle one counterclockwise turn to increase pressure.
3.
Reinstall the split pin with a small hammer.
Figure 7: Removing the split pin
6.6.8 Door Alignment
To align, open the door and loosen the pressures screws located on the lower hinges of the door
using a 3/32" Allen key to free the adjustable hinge rods.
3/32''
Figure 9: Release eccentric hinges
Page 30
Figure 8: Installing the split pin
Figure 10: Adjust eccentric hinges
Installation and operation manual – Chic-Choc woodburning cookstove
3/32''