Connect The Reservoir; Check All Connections - Thermo Scientific Dionex ICS-2000 Operator's Manual

3.4.4

Connect the Reservoir

If it is not already connected,
connect the
OUT
cap to the
which extends from the
plumbing and cable chase on
the top of the ICS-2000 (see
Figure
3.5

Check All Connections

1. Make sure the eluent reservoir is filled and the tubing connecting the reservoir
to the ICS-2000 tubing is securely connected (see
2. Make sure the blue eluent generator electrical cable is connected to the
(or
EGC-1
3. If a CR-TC is installed, make sure the black CR-TC electrical cable is
connected to the
4. If an EPM is installed, make sure the EPM electrical cable is connected to the
(or
EGC-2
5. Make sure the USB cable from the computer is connected to the USB
receptacle on the ICS-2000 rear panel.
Doc. 031857-03 4/06
ELUENT BOTTLE
line from the reservoir
line,
ELUENT IN
3-10).
) connector.
EGC-2
connector.
CR-TC
) connector.
EGC-1
3 • Operation and Maintenance
ELUENT
BOTTLE
OUT
ELUENT
IN
Figure 3-10. Reservoir Connections
Figure 3-10).
3-9