Flow Schematics - Thermo Scientific Dionex ICS-2000 Operator's Manual

2.3

Flow Schematics

The following figures illustrate the liquid flow path through an ICS-2000 when
using suppression in autorecycle mode. Three configurations are shown:
•
Figure 2-13
producing KOH, LiOH, MSA, or NaOH eluent are installed. The required
components include the corresponding type of EluGen cartridge and a CR-
TC.
•
Figure 2-14
producing carbonate/bicarbonate eluent are installed. The required
components include an EGC II K
Electrolytic pH Modifier, and an EGC CO
•
Figure 2-15
producing carbonate eluent are installed. The required components include an
EGC II K
Doc. 031857-03 4/06
illustrates the liquid flow path when the components required for
illustrates the liquid flow path when the components required for
illustrates the liquid flow path when the components required for
CO EluGen Cartridge and an EGC CO
2 3
CO EluGen Cartridge, an EPM
2 3
Mixer.
3
Mixer.
3
2 • Features
2-23