Advertisement
8.
Attach the AC24V power wires and power inputs from the IR light units to the terminal
connector. Connect the power wires from IR units to the terminal. Since AC 24V is polarity
free, Connect AC 24V from outer source, 24V inputs for IR (2 pairs), and 24V inputs for
camera, all to the same terminal connector.
AC24V
power
9.
Prepare two power lines as the 24V inputs for the camera. Connect the input lines from
the enclosure's terminal to that on the camera. The camera can also be powered by PoE.
Power to camera
8
Advertisement
