Pedals S Lipping - Matrix A30 Service Manual

TROUBLESHOOTING- Pedals Sljppjng/Belt Replacement
3.3.8
Symptom: Pedals Slipping or Belt Replacement
Reason:
1. The belt tension is not high enough;
2. The one way bearing is damaged.
Solution:
1. Remove the shrouds and check the belt tension. Tighten the drive belt tension if needed by
spring tension clip to another
2. If the belts are tensioned correctly, belt tension range should be 175-190HZ. The one way bearing is
damaged, replace the drive assembly.
CHAPTER 3: Troubleshootin
hole. The generator bolt should be tightened to 85 ft/ lbs.
moving the
21