Table of Contents
Advertisement
Quick Links
A
A
VAILABLE
CCESSORIES
0.5 to 1 mL Tube
1.5 to 2 mL Tube
Adapter
Adapter
p/n 7713068
p/n 7713065
FDA LISTED
RoHS
Compliant
INSTRUCTIONS FOR DISPOSAL OF WEEE BY USERS IN THE EUROPEAN
UNION
This product must not be disposed of with other waste. Instead, it
is the user's responsibility to dispose of their waste equipment by
handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of
disposal will help to conserve natural resources and ensure that it
is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, waste
disposal service, or where you purchased the product.
200 Shady Lane, Suite 170 • Philipsburg, PA 16866
+1-866-265-1486 (U.S. only) • +1-814-692-7661 • www.druckerdiagnostics.com
Protected by U.S. Patents #6,811,531, & #D718463 Other Patents Pending
SmartView™
Platform
p/n 00-079-009-001
Made in the USA by
642E
Operator's Manual
P/N 03-0-0002-0039 Rev. N
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Drucker Diagnostics 642E
Summary of Contents for Drucker Diagnostics 642E
- Page 1 642E VAILABLE CCESSORIES Operator’s Manual 0.5 to 1 mL Tube 1.5 to 2 mL Tube SmartView™ Adapter Adapter Platform p/n 7713068 p/n 7713065 p/n 00-079-009-001 FDA LISTED RoHS Compliant INSTRUCTIONS FOR DISPOSAL OF WEEE BY USERS IN THE EUROPEAN UNION This product must not be disposed of with other waste.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Model 642E has a true “0 RPM” lid locking system. The lid safety locking system keeps the lid locked at all times when the rotor is in motion (even Model Description ..................1 during power failure). The centrifuge will not allow entry into the rotor chamber unless the centrifuge has power and the rotor is stopped. -
Page 3: Model Description
The Model 642E complies with US, Canadian, and European Safety standards. lighted control panel that displays the status of the machine, easily Lid Safety Switch: The Model 642E lid is secured to the top of the cabinet viewable from a distance. -
Page 4: Supplied Equipment
ARRANTY front top of the cabinet. If this switch is not activated. The light Drucker Diagnostics warranties that this centrifuge is free from defects in will not tur on the machine will not run workmanship and parts for 2 years. -
Page 5: General Specifications
Be sure the outlet is always within reach as the line cord is the means of emergency disconnection! Drucker Diagnostics +1-814-692-7761 - CustomerService@DruckerDiagnostics.com Page | 10 Page | 3 Drucker Diagnostics +1-814-692-7761 - CustomerService@DruckerDiagnostics.com... -
Page 6: Initial Setup Procedure
1. Provide Adequate Ventilation: For cooling purposes, the Model Drucker Diagnostics at 814-692-7661. 642E draws in ambient air through the air intake cover on the top 1. Plug the centrifuge in to an approved electrical outlet. For of the lid and exhausts this air in the rear of the base. The electrical safety, the unit must always be properly grounded. -
Page 7: Control Panel
13. The lid should remain locked until the rotor has nearly stopped. If PINNING ALANCED OADS the machine unlocks prematurely, contact Drucker Diagnostics for Your centrifuge must contain a balanced load in order to work properly. assistance. Use the following rules when loading the rotor. -
Page 8: Verifying Preset Time And Brake
13. If the machine re–locks before the samples are removed, press the ‘OPEN/STOP’ button to unlock the lid for an additional fifteen (15) seconds. Drucker Diagnostics +1-814-692-7761 - CustomerService@DruckerDiagnostics.com Page | 6 Page | 7 Drucker Diagnostics +1-814-692-7761 - CustomerService@DruckerDiagnostics.com...
Need help?
Do you have a question about the 642E and is the answer not in the manual?
Questions and answers