Konica Minolta Magicolor 2300 DL Installation Manual page 13

13
Pressing on the transfer belt unit with
one hand, take the tag attached to the
transfer belt unit fixture with your other
hand, and pull the fixture straight toward
you.
This fixture protects the transfer belt
during initial transportation.
Dispose of the fixture according to
your local regulations.
14
Insert the waste toner bottle.
a
Insert the bottom of the waste toner
bottle
b Push the top of the waste toner bottle
into position so it is firmly seated.
If the waste toner bottle is not correctly
installed or the transfer belt release lever is
at its top position (11 o'clock), the front
door cannot be closed.
15
Close the front door.
Installing the Tray 1 Media Support
Remove the media support from its
plastic shipping bag, and then attach
it to Tray 1.
Insert the three tabs
support into the three holes in Tray 1, and
then lower the two tabs
corresponding holes below Tray 1.
Loading Tray 1 (Multipurpose Tray)
The multipurpose tray is used for all supported media types, including
envelopes, labels, Japanese-sized postcards, thick stock, and
transparencies.
Setting up Your Printer
into the printer.
on the media
into their
9