Setting Up Your Printer - Konica Minolta Magicolor 2300 DL Installation Manual

Setting up Your Printer

WARNING!
Your printer weighs approximately 62 lb (28 kg) with consumables. Be
sure to have help when lifting and moving it.
Do not plug in the power cord until told to do so.
Shipment Contents
Printer (with four toner cartridges, OPC drum cartridge and output tray
support installed)
A Waste toner bottle
Media support for Tray 1
Power cable
Utilities and Documentation CD-ROM
Interface cables are not included in the shipment. If you need cables, contact
your local vendor or computer store.
Unpacking the Printer
We strongly suggest that you save the
packaging materials in case you ever
need to move or ship the printer.
Use the following instructions to unpack your
printer.
1
Remove the protective plastic cover.
2
With another person's help, lift the printer
from the carton. Do not tilt it more than ±1° in
any direction at any time.
For best output quality and longest
consumables life, place the printer on a hard, flat, level, stable surface
capable of supporting about 81 lbs (37 kg).
3
Remove the tape from the
outside of the printer.
6 Setting up Your Printer