Canon XA70 Instruction Manual page 69

• If you set an assignable button to [Å Set WB] (A 92), you can press the button to register a custom white
balance after you point the camcorder at a gray card or white object.
• Using a custom white balance may provide better results in the following cases:
- Changing lighting conditions
- Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps, certain types of fluorescent lights and LED lights
• White balance is not available when infrared recording is activated.
• If you set an assignable button to [Ä WB Priority] (A 92), you can press the button to switch to a frequently
used white balance setting pre-selected with the
> [v Camera Setup] > [Set WB Priority] setting.
White Balance
69