Table of Contents
Advertisement
Menu item
[Output Onscreen Displays]
[Onscreen Markers]
[Distance Units]
[B System Setup] menu
Menu item
[Language H]
[Time Zone/DST]
[Date/Time]
[POWER LED], [Tally Lamp],
[ACCESS LED]
[REMOTE Terminal]
[Assignable Button 1] to
[Assignable Button 5]
[Onscreen Assignable Button]
[CUSTOM Dial & Button]
[Battery Info]
[Backup Menu// 7]
[USB Mode]
[GPS Auto Time Setting]*
Setting options and additional information
[i On], [j Off]
When this setting is set to [i On], the camcorder's onscreen displays will appear also on the
screen of a TV or monitor connected to the camcorder.
[j Off], [4 Level (Gray)], [3 Level (White)], [6 Grid (Gray)],
[5 Grid (White)], [
4:3 (Gray)], [
You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference
to make sure your subject is framed correctly (vertically and/or horizontally).
• Using the onscreen markers will not affect the recordings.
• Displaying the 4:3 marker, you can check the area that is output when the aspect ratio is set to 4:3.
[. meters], [/ feet]
Selects the units to use for the focusing distance display while focusing manually. This setting also
affects units for the altitude in the GPS information of geotagged recordings.
Setting options and additional information
[
], [Dansk], [Deutsch], [
[Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [
[Svenska], [Türkçe], [
], [
[
], [
], [
]
["] (home time zone), [#] (travel time zone);
For each: list of world time zones ([New York]), [$] (DST adjustment): turn on or off
(off)
Date and time adjustment fields; [Date Format]: [Y.M.D], [M.D,Y], [D.M.Y]; [24H]: turn on
(24-hour clock) or off (12-hour clock) (off)
In [Date Format] options, Y=year, M=month, D=day.
[i On], [j Off]
These settings determine whether the following LEDs and indicators will illuminate.
[POWER LED]: The green POWER/CHG indicator.
[Tally Lamp]: When this setting is set to [i On], the tally lamp illuminates while the camcorder is
recording, the remaining battery charge is too low or a card is full.
[ACCESS LED]: The ACCESS indicator when the camcorder is accessing an SD card.
[
RC-V100 (REMOTE A)], [
Following are the default settings for each assignable button. For a complete list of the
functions that can be assigned, refer to the detailed table.
1: [B AF/MF], 2: [± Powered IS], 3: [z Pre REC], 4: [
5: [^ Magnification]
For a complete list of the functions that can be assigned, refer to the detailed table
(default: [
Photo]).
[
IRIS / SHTR / GAIN], [
—
Displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (
mode) or playback time (
• If the battery pack is depleted, the battery information may not be displayed.
[Save], [Load]
Load or save menu settings and custom picture files between the camcorder and the SD card B.
[
Video Output (UVC)], [
GP-E2]
[i Auto Update], [j Disable]
4:3 (White)]
], [English], [Español], [Français], [Italiano],
], [
], [
], [
Standard]
AGC Limit], [y Exposure Comp.], [j Off]
mode).
Menu Options
(A 27)
], [Suomi],
], [
],
(A 27)
(A 26)
(A 86)
(A 92)
Rec Review],
(A 92)
(A 91)
(A 102)
(A 87)
(A 88)
127
Advertisement
Table of Contents
