Insignia INS8058 Installation Manual page 53

insigniarange.com Last Modified: 13/06/2017
Door Seals
Magnetic Seal: Push the magnetic door seal on the handle side of the glass door ensuring this is
tightly fitted.
Rear Door Seal: Place the rear door seal on the opposite side to the magnetic strip ensuring the flap
is facing the fixed glass panel
Handle
Ensuring that the inner thread is protruding out from the handle far enough, place the handle on the
outside of the door and secure by tightening the inner chrome knob to the protruding inner thread
Outside
Inside
Door Wheels
Fit the adjustable wheels to the top and bottom of the glass doors and ensure the wheels are facing towards the
rail then hang the top wheels on to the top inner curved rail.
Now on the bottom wheels please push the button to lower the wheel for ease of installation and push the
wheel into the bottom curve rail. Once you are happy that the wheel is in the track, depress the button and allow
the wheel to enter therefore ensuring a secure a tight fit. Next adjust the top wheels by turning the screw
clockwise in which in turn will pull the wheels towards the track ensuring a secure a tight fit.
Now grease the track to ensure a smooth and long lasting operation (not supplied)
20