Power & Performance; Pch-Fw Configuration - DFI CS551 User Manual

Advanced
X
Power & Performance
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Power & Performance
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
C states [Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Intel(R) SpeedStep(tm)
This field is used to enable or disable the Intel SpeedStep
the balance between system's power consumption and performance. After it is enabled in the
BIOS, EIST features can then be enabled via the operating system's power management.
Turbo Mode
Enable or disable turbo mode of the processor. This field will only be displayed when EIST is
enabled.
C states
Enable or disable CPU Power Management. It allows CPU to enter "C states" when it's idle and
nothing is executing.
User's Manual | CS551
Allows more than two fre-
quency ranges to be sup-
ported.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Technology, which helps optimize
®
Advanced
X

PCH-FW Configuration

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
ME State [Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Me FW Image Re-Flash
This field is used to enable or disable the ME FW Image Re-Flash function, which allows the
user to update the ME firmware.
Chapter 3
BIOS SETTINGS
When Disabled ME will be
put into ME Temporarily
Disabled Mode.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
32