Jumper Settings; Front Panel (Jp5); Clear Cmos (Jp2) - DFI CS551 User Manual

CPU Installing the Heatsink and Fan
X X
Place the heatsink/fan and module combo
onto the stand-offs. Make sure the stand-off
screw holes on the combo and those on the
stand-offs align.
Place the stand-off screws provided in the
package into the screw holes of the combo.
Use a screwdriver to fasten the screws onto
the chassis tight.
Note:
It is typical that the chassis is customized, in which case the installation shall vary according
to the design of the chassis instead of the instructions provided here.
User's Manual | CS551
Chapter 2
HARDWARE INSTALLATION
15