Trusted Computing; Ptn3460 Configuration - DFI CS551 User Manual

Advanced
X

Trusted Computing

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
TPM20 Device Found
Firmware Version 5.62
Vendor: IFX
Security Device Support [Enable]
Pending operation [None]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Security Device Support
This field is used to enable or disable BIOS support for the security device such as an TPM 2.0
to achieve hardware-level security via cryptographic keys.
Pending operation
To clear the existing TPM encryption, select "TPM Clear" and restart the system. This field is
not available when "Security Device Support" is disabled.
User's Manual | CS551
Advanced
X

PTN3460 Configuration

Enables or Disables BIOS PTN3460 Function
support for security de - LCD Panel Type
v i c e . O . S w i l l n o t s h o w LCD Panel Color Depth
Security Device. TCG EFI Backlight Type
protocol and INT1A inter-
face will not be available.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
PTN3460 Function
Enable or Disable PTN3460 LCD Features. When this field is disabled, the following fields will
remain hidden.
LCD Panel Type
Select the resolution of the LCD Panel — 800X480, 800X600, 1024X768, 1366X768, 1280X1024,
1920X1080, or 1920X1200.
LCD Panel Color Depth
Select the color depth of the LCD Panel — 18 Bit, 24 Bit, 36 Bit, 48 Bit.
Backlight Type
Select the backlight type of the LCD Panel —
Normal + PWM
Normal + DC
Invert + PWM
Invert + DC
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
[Enable]
[1920x1080]
[48 Bit]
[Normal+PWM Mode]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Note:
The configuration must match the specifications of your LCD Panel in order for
the LCD Panel to display properly.
Chapter 3
BIOS SETTINGS
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
33