Sata And Rst Configuration - DFI CS551 User Manual

Advanced
X

SATA And RST Configuration

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
SATA And RST Configuration
SATA Controller(s) [Enabled]
SATA Speed [Auto]
SATA Mode Selection [AHCI]
Serial ATA Port 1 (M.2-M) Empty
Port 1 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 2 (SATA0(R2)) Empty
Port 2 [Enabled]
Hot Plug [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
SATA Controller(s)
This field is used to enable or disable the Serial ATA controller.
SATA Speed
This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Control-
ler Interface).
Intel RST Premium With Intel Optane System Acceleration This option allows you to create
RAID or Intel Rapid Storage configuration along with Intel
tion on Serial ATA devices.
Use RST Legacy OROM
This field shows up when SATA Mode Selection is set to Intel RST Premium With Intel Optane
System Acceleration. Enable or disable to use RST Legacy OROM when CSM is enabled.
Port and Hot Plug
Enable or disable the Serial ATA port and its hot plug function.
User's Manual | CS551
E n a b l e o r d i s a b l e S ATA
Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Optane system accelera-
™
®
Chapter 3
BIOS SETTINGS
41