Table of Contents
Advertisement
Advanced
X
Power & Performance
Intel(R) SpeedStep(tm)
This field is used to enable or disable the Intel SpeedStep® Technology, which helps optimize
the balance between system's power consumption and performance. After it is enabled in the
BIOS, EIST features can then be enabled via the operating system's power management.
C states
Enable or disable CPU Power Management. It allows CPU to enter "C states" when it's idle and
nothing is executing.
User's Manual | CS332-C246/Q370
Advanced
X
PCH-FW Configuration
ME State
When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.
Manageability Features State
Enable or disable Intel(R) Manageability features. This option disables/enables Manageability
Features support in FW. To disable, support platform must be in an unprovisioned state first.
AMT BIOS Features
When disabled, AMT BIOS features are no longer supported and user is no longer able to ac-
cess MEBx Setup. This option does not disable manageability features in FW.
AMT Configuration
Configure Intel(R) Active Management Technology Parameters.
ME Unconfig on RTC Clear
When disabled, ME will not be unconfigured on RTC Clear.
Firmware Update Configuration
Configure Management Engine Technology Parameters.
Chapter 3
BIOS SETTINGS
29
Advertisement
Table of Contents
