Table of Contents
Advertisement
F
D
:
Raming
ePth
The U37 can adjust its front face to account for different framing material thicknesses. It can account for
material thickness ranging from 1/2" to 2".
1. Remove the safety screen (see M
2. Remove the door trim (see M
3. On the inside of the cabinet there are two side covers attached via magnets. Gently pull on the side cover
until they detach and set them aside (see Figure 36).
4. There are thirteen (13) slotted fasteners that need to be loosened to adjust the framing depth. There are
two (2) behind each of the side covers removed in the prior step, four (4) on the outside of each cabinet
side, and one (1) of the top-center of the unit (see Figure 37).
5. With the fasteners loosened, the front face should now be adjustable. All pieces are still connected
to each other and should move as one. Adjust the depth to match the desired framing material then
retighten the thirteen (13) slotted fasteners.
Figure 36: Side Cover Removal
22
Initial Installation
QUALIFIED INSTALLERS ONLY
a
aIntenance
nD
a
s
aIntenance
nD
s
- r
s
erVIce
eMoVe
afety
- r
D
t
erVIce
eMoVe
oor
Adjustment Slots
Figure 37: Framing Depth Adjustment
s
on page 10).
creen
on page 11).
rIM
Advertisement
Table of Contents
