Batteries - Kodak DC200 Plus User Manual

Chap1newBook Page 12 Friday, February 5, 1999 7:02 AM

Batteries

The DC200/DC210 comes with four AA batteries. Standard 1.5V alkaline, 1.5V
lithium, or rechargeable 1.2V Ni-Cd or Ni-MH batteries may be used.
The battery power icon changes automatically. You may not select or change
this icon.
Full—batteries are fully charged.
Low—batteries need to be replaced.
Blinking—batteries are insufficient to run camera and need to
be replaced.
Pictures on memory cards are not lost if batteries are depleted.
To install the batteries:
2-12
1
Place your thumb on the battery door.
2
Slide the battery door away from the camera.
3
Insert the batteries as indicated on the battery
cover and close the battery door.
Remove the batteries if the camera will not
be used for an extended period of time. This
extends battery life and prevents camera
damage from battery leaks or corrosion. If
the batteries are removed from the camera for
more than a few minutes the date and time
will be deleted and must be reset.