Kodak DC200 Plus User Manual page 58

Chap1newBook Page 8 Friday, February 5, 1999 7:02 AM
Communication Settings
The Communications Settings window allows you to view and change the serial
port and port speed settings while the camera is attached to your computer. See
"Camera Communication Settings" on page 7- 1 for more detailed information.
To open the Communication Setting window:
1
Click on the Camera icon with the right mouse button.
2
Select Camera Properties from the pop-up menu.
If the software does not recognize the camera, continue to adjust the serial
port speed on COM1, and the other COM ports, until it is recognized. Once
your computer can communicate with your camera, gradually increase
speed to optimize transfer picture time.
To exit: click on the OK button to apply the changes and exit the window.To exit
the window without making any changes, click on the CANCEL button.
7-8
3
Click on the COMMUNICATIONS
SETTINGS button.
4
If necessary, click on the arrows to
adjust the:
port, if your computer does not
recognize the camera
speed, to optimize picture
transfer time
If your computer is faster than
166 MHz you can click on the
ADVANCED button and adjust
the serial speed.