Date Stamp - Kodak DC200 Plus User Manual

Chap1newBook Page 5 Friday, February 5, 1999 7:02 AM

Date Stamp

The Date Stamp screen is used to record the date on your pictures.
To turn on the Date Stamp:
The date stamp is only visible after the picture has been taken with the
camera in either Review mode, or in Capture mode with Quickview
activated. See "Quickview" on page 4-7, or chapter 3, "Review" on page
3-1 for details.
To cancel Date Stamp: press a
press the DO-IT button. The Date Stamp setting is maintained until another
setting is selected. This setting does not change when the camera is turned off.
1
Set the Mode dial to Preferences.
2
Turn the camera on.
The LCD displays the Preferences screen.
3
/
Press a button until the Date Stamp
icon is highlighted.
4
Press the DO-IT button.
The LCD displays the main Date
Stamp screen. The current setting is
checked ( ü ).
5
/
Press a button until the appropriate
date stamp order is highlighted.
6
Press the DO-IT button.
The main Preferences screen reappears.
The next time you take a picture the Date
Stamp will appear in the lower right hand
corner of the picture on the LCD screen.
/
button until OFF is highlighted, and then
4
4-5