Kodak DC200 Plus User Manual page 72

Kodak dc200 plus: users guide
Table of Contents

Advertisement

Chap1newBook Page 6 Friday, February 5, 1999 7:02 AM
DC200/DC210 Camera
Problem
Part of the picture is missing.
Picture is too dark.
Picture is too light.
Stored pictures are damaged.
9-6
Cause
Solution
Something was
Keep hands, fingers,
blocking the lens
or other objects away
when the picture was
from the lens when
taken.
taking pictures.
Your eye or the picture
Leave space around
was not centered
subject when
correctly in the
centering picture in
viewfinder.
viewfinder.
Flash is not on or did
Turn on the flash. See
not go off.
"Flash" on page 2-9.
The subject is too far
Move so there is no
away for the flash to
more than 10 feet
have an effect.
(3 m) between the
camera and the
subject.
The subject is in front
Change your position
of a bright light.
so the light is not
behind the subject.
The flash is not
Change to automatic
needed.
flash. See"Flash" on
page 2-9.
The subject is too
Move so there is at
close when the flash
least 1.6 ft. (0.5 m)
was used.
between the camera
and the subject.
The light sensor is
Hold the camera so
covered.
your hands or other
objects do not cover
the light sensor.
The memory card was
Make sure the Ready
removed when the
light is not blinking
Ready light was
before removing the
blinking.
memory card.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc210 plus zoom

Table of Contents