Installation Software; Windows System Requirements; Installing The Software - Kodak DC200 Plus User Manual

Kodak dc200 plus: users guide
Table of Contents

Advertisement

Chap1newBook Page 1 Friday, February 5, 1999 7:02 AM
KODAK Installation Software (Installation software) quickly and easily installs
the software included on the DC200/DC210 CD to your computer.

WINDOWS System Requirements

WINDOWS 95, WINDOWS 98, or WINDOW NT System Software
Personal computer with 486/66MHz microprocessor minimum,
PENTIUM Processor recommended
8 MB or more of RAM available, 16 MB recommended
available serial port and CD-ROM drive

Installing the Software

While the Installation software is automatically loading your software, take a few
minutes to fill out and send in the DC200/DC210 product registration card. This
allows you to receive information regarding software updates and registers some
of the products included with the camera.
Close all other applications before starting the Installation software.
1
Place the DC200/DC210 CD into your CD-ROM drive.
If Auto Run is turned on in WINDOWS 95, WINDOWS 98, or
WINDOWS NT, the first install window automatically appears.
Proceed to step 4. If the first install window does not automatically
appear proceed to step 2.
2
Choose Run from the Start menu.
3
Type the path to the drive that contains the CD and then type \setup.exe
For example: d:\setup.exe
Installation
Software
5
5-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc210 plus zoom

Table of Contents