Kodak DC200 Plus User Manual page 70

Chap1newBook Page 4 Friday, February 5, 1999 7:02 AM
Windows-DC200/DC210 Camera Communications
Problem
Computer cannot
communicate with the camera.
9-4
Cause Solution
Some Advanced See the Power
Power Management Management section
utilities on laptops can of your laptop's user
turn off ports to save guide to disable this
battery life. feature.
Conflict with another Refer to the serial
serial device, such as a communication or
modem. corresponding section
of your computer's
modem, and/or
operating system's
user's guide.
Camera power is off. Turn the camera on.
Camera is not Connect serial cable to
connected to serial camera and COM
cable or cable is not port. See "Serial Cable
connected to the Connection" on page
computer's COM port. 6-2.
Infrared port is not Check the computer's
responding. infrared connection.
Be sure that the
camera is on.
Port settings in Change the COM port
software's Acquire- settings to Auto-
Preferences may be set Search or to a specific
to the incorrect COM COM port.
port.
The Mode dial is not Set the camera's Mode
set to Connect. dial to Connect.