Chap1newBook Page 6 Friday, February 5, 1999 7:02 AM
Status Display
The Status Display, located at the top of your camera, allows you to view and
change some camera settings. The following sections offer detailed descriptions
of Status Display settings.
The DC200/DC210 must be turned on to view the Status Display.
Battery
Status
Flash
Red-eye
Reduction
Pictures Remaining
The Pictures Remaining icon changes automatically to indicate the remaining
number of pictures which can be stored at the current quality and resolution
setting. You may not select or change the Pictures Remaining icon.
When the card's memory is full the Status Display indicates Full. You must
delete existing pictures or change memory cards to capture additional pictures.
To save pictures, transfer them to your computer before deleting them. For more
information on how to move or delete pictures, see "Delete One Picture" on page
2-3, "Delete One or All Pictures" on page 3-2, or the software chapters.
The Pictures Remaining number does not always change by one when a
picture is taken if the picture content is easily compressed.
2-6
Resolution
Quality
Pictures
Remaining
Close Up
)
(DC210 Only
Self-Timer
Memory Card Status
(Inserted)