NOTICE:
2. Place the assembly on the system board.
3. Tighten in consecutive order the four captive screws, labeled "1" through "4," on the thermal-cooling assembly.
4. Replace the palm rest (see
NOTE:
If necessary, ensure that you reconnect the coin-cell battery (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Replace the media bay device (see
8. Replace the battery.
Back to Contents Page
Great user manuals database on
Ensure that all thermal-cooling pads adhere to both the thermal-cooling assembly and to the appropriate chips.
Palm
Rest).
Replacing the
Keyboard).
Hinge
Cover).
Media Bay
Devices).
UserManuals.info
Coin-Cell
Battery) before you replace the keyboard.