1 top flex-cable
connector
4 inverter board
Removing the Display Hinges
CAUTION:
CAUTION:
surface, such as a connector on the back of the computer.
1. Follow the instructions in
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the M2.5 x 5-mm screw from the right display hinge.
1
M2.5 x 5-mm screw
4
alignment pin
6. Lift the right display hinge off the two alignment pins and out of the top cover.
7. Repeat
step 5
Back to Contents Page
Great user manuals database on
2 flex-cable release levers
3 back of display panel
(2)
5 bottom flex-cable
6 pull-tab on bottom flex-cable
connector
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Before You
Begin.
Display
Assembly).
Removing the Display
Removing the Display
2
display hinges (2)
(left and right)
and
step 6
for the left display hinge.
UserManuals.info
connector
Bezel).
Panel).
3
top cover