Preparation For Use; Opening/Folding The Back-Rest; Removing/Putting In Place The Rear Wheels - OFF CARR IDRA 2.0 Instruction Manual

3. Preparation for use

The preparation for use of these devices must be performed by qualified
personnel both to evaluate the suitability of the product and to provide the
correct instructions to the user.

3.1 Opening/folding the back-rest

The wheelchair is sent with the rear wheels aside and with the backrest completely
tilted down.

Removing/Putting in place the rear wheels

3.2
Usually IDRA 2.0 are sent with the back wheels aside.
It is possible to assemble or release the wheels as follows:
• ensure the brakes are in released position;
• insert the shaft into the wheel hub by holding down the button;
• keeping the shaft button pressed insert it into the bush on the frame of the wheelchair;
• release the button;
• check the efficiency of the engagement by trying to pull out the wheel without pressing the
button and making sure it does not come out.
OPENING
Pull the string to unlock the back-rest and pull
the back-rest upwards until the rear locks snap
in their locking places.
FOLDING
Pull the string to unlock the back-rest and push
it down until the rear locks snap in their
locking places.
6