Native Instruments DRUMS OverKILL Operation Manual page 25

Output Section
When you click the Outputs button, the Outputs window appears at the bottom
of the rack.
There are two types of faders: "Blue" faders that relate to channel outputs
(the number of faders depends on the number of available outputs), and four
"orange" faders that control return from the four send effects, as used in Multi
setups. Each fader, output or aux return, has four effect insert points.
Let's cover output channel features, going from top to bottom.
Add Channel: Adds another output channel to the Outputs section.
Delete Channel: To delete a channel, click on any section of the channel
that doesn't contain an editable parameter; the channel becomes outlined in
yellow. Click on Delete Channel to delete. Note: You cannot delete the Aux
return channels.
Hide Inserts: Hides all inserts to conserve space.
Edit Effect: To edit an insert effect, click on it. Then click on this button to
open and close the edit section for that effect. To delete an effect, click on
the effect strip that includes the parameters (not the module in the slot); the
effect strip becomes outlined in orange. Then, press the computer keyboard's
Delete key.
Reset Out Map: This button can be used to restore the output mapping to
the default settings.
Make Default: Clicking on this button saves the current output mappings as
your permanent defaults. (These output mappings are saved to the KONTAKT
PLAYER 2 application directory inside the Defaults folder.)
Name Fields: Each channel has a name field at the top. Double-click in the
field, and type in the desired name.
Insert Effect Slots: To insert an effect, click on the downward arrow toward
the right of the slot, and select the desired effect from the drop-down list.
KONTAKT PLAYER 2 – 25