Native Instruments DRUMS OverKILL Operation Manual page 13

2. Click on the Sound layer tab to open the interface for editing, e.g.
add more instruments or send effects, assign controls, and thus begin
designing your Sound layer.
• KONTAKT PLAYER 2 now appears in the instrument slot and is ready
to use. The instrument mixer channel will allow you to mix, pan, and
process the software's output.
• If the Instrument interface is not already open, press the E button in
the assignment panel to call up the KONTAKT PLAYER 2 interface.
Here you can control and edit all the features and functions that the
product has to offer.
• After loading an Instrument, you should be able to trigger it via MIDI
using a keyboard controller. KONTAKT PLAYER 2's sound will generate
through Kore and directly to your sound card. If the plug-in does not
receive MIDI or generate audio, then make sure to check the following
areas:
• Open the Setup menu>Audio MIDI settings dialog. Select the MIDI tab
and make sure your MIDI device shows up and is ON.
• Check the channel's MIDI filter settings. Make sure that the MIDI
channel is set to receive on the channel which your keyboard sends.
KONTAKT PLAYER 2 – 13